Headliner Repair for F-250 2WD Super Duty V10-68L | Interior Moulding & Trim | Service
11. Remove the two rear pushpins, then the two front pushpins.
12. Position the left and right rear door opening weatherstrips down from the headliner.
13. Remove the bench seat, both seats (60/40), middle and right seats (40/20/40), or right bucket seat, depending on the front seat configuration, and
the floor console.
NOTE: If equipped, the left front seat back must be positioned down.
14. Remove the headliner through the right rear door opening.
NOTE: Be careful not to damage the headliner when removing it from the vehicle.
INSTALLATION
1. Follow the removal procedure in reverse order.
CAUTION: Use protective tape on the edge of the headliner that comes in contact with the door opening or the headliner material can tear.
