F 250 2WD Super Duty V10-6.8L VIN S (1999)
1. Install the front disc brake caliper anchor plate stainless steel rail clips.
2. Install the pads.
2. Compress the caliper pistons.
3. CAUTION: Use care not to damage the bleeder screw or front disc brake rotor shield.
Install the disc brake caliper.
1. Install the disc brake caliper.
2. Install the disc brake caliper pin bolts.
4. Install the wheel and tire assembly.
5. Lower the vehicle.
6. Fill the brake master cylinder reservoir with clean High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting
Ford specification ESA-M6C25-A. Install the brake master cylinder filler cap.