F 250 2WD Super Duty V10-6.8L VIN S (1999)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Remove the air cleaner outlet tube.
2. Remove the accelerator control splash shield.
1
Release the tab.
2
Remove the splash shield.
3. Remove the accelerator control splash shield.
1
Remove the bolts.
2
Remove the splash shield.
4. Disconnect the speed control actuator cable.
1
Disconnect the speed control actuator cable from the throttle body cam and position aside.
2
Depress the retaining clips to remove the cable from the bracket.
5. Remove the speed control actuator cable cap from the speed control servo.
-
Push in the locking arm on the speed control actuator cable cap then rotate the cap counterclockwise.