F 250 2WD Super Duty V10-6.8L VIN S (1999)
27. Install the EGR valve-to-exhaust manifold tube.
^
Hand-tighten the fittings.
^
Tighten the upper fitting to 55-65 Nm (41-47 ft. lbs.).
^
Tighten the lower fitting to 55-65 Nm (41-47 ft. lbs.).
28. Install the EGR transducer bracket.
^
Position the bracket.
^
Install the bolts.
29. Connect the EGR transducer vacuum lines.
30. Connect the EGR transducer and the throttle position sensor connectors.
