F 250 2WD Super Duty V10-6.8L VIN S (1999)
16. NOTE: The EGR valve is shown removed for clarity.
Connect the EVR solenoid vacuum and electrical connectors.
17. Connect the EGR valve vacuum line.
18. Install the EGR valve-to-exhaust manifold tube.
^
Hand-tighten the fittings.
^
Tighten the upper fitting to 55-65 Nm (41-47 ft. lbs.).
^
Tighten the lower fitting to 55-65 Nm (41-47 ft. lbs.).
19. Install the EGR transducer bracket.
^
Position the bracket.
^
Install the bolts.
