F 250 2WD Super Duty V10-6.8L VIN S (1999)
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley.
6. Remove the A/C clutch field coil.
1
Note the location of the A/C clutch field coil electrical connector.
2
Install the Shaft Protector for Coil Removal on the nose opening of the A/C compressor.
3
Install the Differential Side Bearing Puller.
4
Remove the A/C clutch field coil.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
INSTALLATION
1. Clean the A/C clutch field coil and the pulley bearing mounting surfaces.
2. Install the A/C clutch field coil.
1
Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector properly positioned.