F 250 2WD Super Duty V10-6.8L VIN S (1999)
Receiver Dryer: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Recover the refrigerant.
3. Disconnect the A/C cycling switch connector.
4. Disconnect the evaporator core outlet tube.
CAUTION: To prevent damage to the fitting and the tube, use a backup wrench when removing the suction accumulator/drier.
5. Disconnect the manifold and tube assembly.
6. Remove the suction accumulator/drier bracket clamp bolts and remove the suction accumulator/drier.
