F 250 2WD Super Duty V10-6.8L VIN S (1999)
Headlamp Bulb: Service and Repair
Sealed Beam
REMOVAL
1. Remove the parking lamp assembly.
1
Remove the bolts.
2
Position the parking lamp assembly so the connectors can be accessed.
3
Disconnect the connectors.
NOTE: The side marker lamp and parking lamp are one piece. Do not pull on the side marker to pull the assembly out.
2. Remove the headlamp bezel.
1
Remove the upper bolts.
2
Remove the lower bolts.
3
Remove the headlamp bezel.
3. Remove the headlamp.
1
Remove the screws.
2
Remove the headlamp retaining ring.
3
Position the headlamp so the connector can be accessed.
4
Disconnect the connector.
INSTALLATION