F 250 2WD Super Duty V10-6.8L VIN S (1999)
1. Install the headlamp.
1
Connect the connector.
2
Position the headlamp.
3
Position the headlamp retaining ring.
4
Install the screws.
2. Install the headlamp bezel.
1
Position the headlamp bezel.
2
Install the lower two bolts.
3
Install the upper two bolts.
3. Install the parking lamp assembly.
1
Connect the connectors.
2
Position the parking lamp assembly.
3
Install the bolts.
NOTE: The side marker lamp and parking lamp are one piece. Push on both to install the assembly.
