F 250 2WD Super Duty V10-6.8L VIN S (1999)
Alignment: Service and Repair
Toe
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the straight-forward position by attaching a rigid link from the steering wheel to the brake
pedal.
3. Check the toe settings.
4. Loosen the nuts.
-
Clean and lubricate the steering linkage and tie rod end threads.
5. Rotate the tie rod adjusting sleeves to obtain the correct toe setting.
6. Position the RH adjusting sleeve clamp opening downward within 45 degrees of vertical. Tighten the nuts.
7. Position the LH adjusting sleeve clamp opening upward within 45 degrees of vertical. Tighten the nuts.
8. Recheck the toe settings.
