F 250 2WD Super Duty V10-6.8L VIN S (1999)
5. Remove the MAF sensor plate and mass air flow sensor from the outlet side of the Engine Air Cleaner.
6. Disconnect the Mass Airflow (MAF) sensor connector.
7. Remove the nuts and separate the Mass Airflow (MAF) plate from the mass air flow sensor.
INSTALLATION
1. Follow the removal procedure in reverse order.
CAUTION
^
Do not tamper with the Mass Airflow (MAF) sensing elements located in the airflow bypass; tampering may result in unit failure.
^
The grommet used to seal the Engine Air Cleaner housing at the extension harness must be fully seated. Failure to do so will result in
unmetered air entering the engine.
