F 250 2WD Super Duty V10-6.8L VIN S (1999)
overhaul the Oil-To-Air (OTA) will be required to be replaced.
Thoroughly flush the cooler lines and the cooler bypass valve.
Installation
1. After the torque converter has drained, install the drain plug.
2. Install the torque converter drain plug cover.
3. NOTE: Prior to installation, lightly lubricate the seal with clean Motorcraft MERCON or MERCON V Automatic Transmission Fluid or
equivalent meeting FORD specification.
Press a new fluid filter and seal assembly into the pump bore until seated.
4. CAUTION: Mixing (A) 4x2-style and (B) 4x4-style transmission fluid filters and transmission pan assembly components can cause
transmission damage.
