F 250 2WD Super Duty V10-6.8L VIN S (1999)
3. Disconnect the digital Transmission Range (TR) sensor electrical connector.
4. Remove the digital transmission (TR) sensor.
1
Remove the bolts.
2
Remove the digital Transmission Range (TR) sensor.
5. NOTE: A No. 53 drill bit (1/16 inch) can be used instead to remove the manual lever shaft retaining pin.
Remove the manual lever shaft retaining pin.
1
Insert the Lock Nut Pin Remover into the retaining pin.
2
Remove the manual lever shaft retaining pin.