F 250 2WD Super Duty V10-6.8L VIN S (1999)
Valve Body: Service and Repair
Removal and Installation
Removal
NOTE: If the transmission has been disassembled to replace worn or damaged parts, and the valves in the main control valve body stick repeatedly
from foreign material, the torque converter must be removed and cleaned by using a mechanically agitated cleaner, such as the Torque Converter/Oil
Cooler Cleaner.
1. Remove the transmission fluid level indicator.
2. Disconnect the solenoid body electrical connector.
3. Remove the fluid pan gasket and filter.
4. Remove the accumulator body.
1
Remove the bolts.
2
Remove the nuts.
3
Remove the accumulator body.
