F 250 2WD Super Duty V10-6.8L VIN V (2005)
4. Remove the bolts and the safety belt buckle assembly.
Right side safety belt buckle and center lap belt
5. Remove the bolts and the safety belt buckle assembly.
All vehicles
6. NOTE:
-
Make sure to tighten all nuts and bolts to specification.
-
When installing a new safety belt buckle and lap belt assembly, make sure to install it at the second row right hand position of the vehicle. This
is due to the safety belt buckles and tongues being different sizes from the left hand to the right hand side.
-
Make sure the safety belt webbing is not twisted prior to installation.
To install, reverse the removal procedure.
-
After installation, make sure the safety belt buckle and lap belt are positioned between the seat backrest and cushion and accessible to the
passengers after installation.
7. Check the active restraint system for correct operation.
