F 250 2WD Super Duty V8-5.4L (2008)
2. Fold the rear seat backrests down.
3. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover upward.
2
Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3
Remove the shoulder safety belt guide.
4. Position aside the rear door opening weatherstrips.
5. Remove the safety belt anchor.
-
Remove the safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt anchor.
6. Remove the C-pillar trim panel.
-
Route the safety belt and the shoulder safety belt guide through the C-pillar trim panel opening.
