F 250 2WD Super Duty V8-5.4L (2008)
Sunroof / Moonroof Panel: Service and Repair
Roof Opening Panel
ROOF OPENING PANEL
Exploded View
Removal and Installation
NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof
opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed or when a new roof
opening panel assembly has been installed. For additional information, refer to Roof Opening Panel Motor Initialization. See: Testing and
Inspection/Programming and Relearning
1. Position the roof opening panel in the VENT position.
2. Remove the 4 roof opening panel glass screws.
-
To install, tighten to 4 Nm (35 lb-in).