F 250 2WD Super Duty V8-5.4L (2008)
Crew Cab Bucket Seat Cushion (Part 2)
Disassembly and Assembly
1. Remove the rear seat.
2. Remove the seat backrest.
3. Release the cushion trim cover J-clips.
4. Remove the pin-type retainers and separate the cushion trim cover from under the outboard side of the cushion frame.
5. Remove the cushion frame from the cushion foam pad.
6. Remove the pin-type retainers and cushion foam pad shields.
7. Invert the cushion trim cover, remove all the hog rings and remove the cushion trim cover from the cushion foam pad.
8. To assemble, reverse the disassembly procedure.
Seat Cushion - Rear, SuperCab
SEAT CUSHION - REAR, SUPERCAB