F 250 2WD Super Duty V8-5.4L (2008)
Connecting Rod Bearing: Specifications
Connecting Rod
Rod-to-pin clearance ........................................................................................................................................... 0.009-0.0235 mm (0.0004-0.0093 inch)
Rod pin bore diameter ....................................................................................................................................... 22.012-22.024 mm (0.8666-0.8671 inch)
Rod length (center-to-center) ....................................................................................................................................................... 169.1 mm (6.6575 inch)
Maximum allowed bend .............................................................................................................................................................. 0.038 mm (0.0015 inch)
Maximum allowed twist(a) ............................................................................................................................................................ 0.05 mm (0.0020 inch)
Bearing bore diameter (with assembled liners) ................................................................................................. 53.049-53.027 mm (2.0885-2.0877 inch)
Bearing-to-crankshaft clearance ............................................................................................................................ 0.064-0.026 mm (0.0025-0.0010 inch)
Rod side clearance ................................................................................................................................................ 0.475-0.125 mm (0.0187-0.0049 inch)
(a) The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends
of a 203 mm bar, 105.5 mm on each side of rod centerline.
