F 250 2WD Super Duty V8-5.4L (2008)
14. NOTE: The LH timing chain tensioner arm has a bump near the dowel hole for identification.
Position the LH timing chain tensioner arm on the dowel pin and install the LH timing chain tensioner and bolts.
^
Tighten to 25 Nm (18 lb-ft).
15. Remove the retaining clip from the LH timing chain tensioner.
16. Position the lower end of the RH (outer) timing chain on the crankshaft sprocket, aligning the timing mark on the sprocket with the single copper
(marked) chain link.
