F 250 2WD Super Duty V8-5.4L (2008)
6. If the evaporator core orifice is broken, screw the end of the special tool into the broken orifice. Hold the T-handle stationary while rotating the
tool body to remove the evaporator core orifice.
Installation
All vehicles
1. Lubricate the evaporator core orifice O-ring seals in clean PAG oil and install the evaporator core orifice using the special tool.
2. Connect the evaporator core orifice access fitting.
-
Install a new O-ring seal.
6.4L diesel vehicles
3. Install the RH fender splash shield.
All vehicles
4. Lubricate the refrigerant system with the correct amount of clean PAG oil.
5. Evacuate, leak test and charge the refrigerant system.