F 250 2WD Super Duty V8-5.4L (2008)
6.8L (3V) Engine (Part 2)
Exploded View
Removal and Installation
1. Disconnect the air cleaner outlet pipe from the air cleaner cover.
-
To install, tighten to 4 Nm (35 lb-in).
2. Disconnect the mass air flow (MAF) sensor electrical connector.
3. Release the retaining clips and position the air cleaner cover aside.
4. If servicing the air cleaner cover, remove the 2 bolts and the MAF sensor.
-
To install, tighten to 3 Nm (27 lb-in).
5. Remove the air cleaner element.
6. CAUTION: The air cleaner element must be fully seated into the air cleaner housing. Failure to do so will result in unusual engine noise.
To install, reverse the removal procedure.