F 250 2WD Super Duty V8-5.4L (2008)
Engine Control Module: All Technical Service Bulletins
Engine Controls - DTC P0607 Stored In PCM
TSB 09-26-7
01/04/10
5.4L / 4.0L - DTC P0607
FORD:
2008-2010 Mustang, F-250, F-350
ISSUE
Some 2008-2010 F-Super Duty 250-350 vehicles equipped with 5.4L engine and automatic transmissions and Mustang vehicles equipped with 4.0L
engine and automatic or manual transmissions may exhibit diagnostic trouble code P0607 (control module performance) stored in the powertrain control
module (PCM) memory.
ACTION
Reprogram the PCM to the latest calibration using IDS release 64.08 and higher. This new calibration is not included in the VCM 2009.11 DVD.
Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
092607A
2008-2010 F-Super Duty
0.3 Hr.
5.4L 3V, 2008-2010
Mustang 4.0L SOHC
Check For DTCs And
Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECALEM
04
Disclaimer
