F 250 2WD Super Duty V8-5.4L (2008)
5. Separate the spring lock coupling ends.
Connect - Type II
1. Inspect and clean both spring lock coupling ends.
2. NOTE:
-
Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
-
Lubricate the spring lock coupling with clean engine oil to ease assembly.
Align and push the fuel tube spring lock coupling until a click is heard.
3. Pull on the spring lock coupling to make sure it is fully seated. If equipped, install the safety clip.
4. Connect the battery ground cable.
