F 250 2WD Super Duty V8-5.4L (2008)
Variable Induction Control Actuator: Service and Repair
CHARGE MOTION CONTROL VALVE (CMCV)
Removal and Installation
1. Remove the intake manifold.
2. Disconnect the charge motion control valve (CMCV) RH and LH rods from the intake manifold.
-
Lubricate the CMCV RH and LH rod ends with clean engine oil prior to installation.
3. Remove the stud bolt, the 2 bolts and the CMCV.
-
To install, tighten to 6 Nm (53 lb-in).
4. To install, reverse the removal procedure.
