F 250 2WD Super Duty V8-5.4L (2008)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
Turbine Shaft Speed (TSS) Sensor and Intermediate Shaft Speed Sensor
Material
Removal
1. Disconnect the turbine shaft speed (TSS) and intermediate shaft combination speed sensor electrical connector.
NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of foreign material to prevent contamination of the
transmission.
2. Remove the TSS and intermediate shaft combination speed sensor.
1
Remove the bolt.
2
Remove the TSS and intermediate shaft combination speed sensor.
Installation
1. Install the TSS and intermediate shaft speed sensor.
1
Lubricate the O-ring with clean automatic transmission fluid and install the TSS and intermediate shaft speed sensor.