F 250 2WD Super Duty V8-5.4L (2008)
webbing are not incorrectly twisted.
2. Remove the rear seat backrest.
LH outboard/LH center safety belt buckle assembly
3. Remove the LH outboard/LH center safety belt buckles from the elastic strap.
4. Remove the bolt and LH outboard/LH center safety belt buckle assembly.
-
To install, tighten to 55 Nm (41 lb-ft).
RH outboard/RH center safety belt buckle assembly
5. Remove the RH outboard/RH center safety belt buckles from the elastic strap.
6. Remove the bolt and RH outboard/RH center safety belt buckle assembly.
