F 250 2WD Super Duty V8-5.4L (2008)
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the front transmission fluid cooler tube assembly hoses from the radiator in-tank cooler and the auxiliary cooler.
3. Remove the front fluid cooler tube secondary latches.
4. Using the special tool, disconnect the transmission fluid cooler tube assemblies.
5. Disconnect the front cooler tube assembly retainer from the frame rail and remove the front transmission fluid cooler tube assembly.
6. Remove the fluid cooler tube assembly bracket nut.
7. Remove the starter harness bracket nut and position the bracket aside.
Early build vehicles
8. Remove the remote mount transmission fluid filter secondary latches.
9. CAUTION: A backup wrench must be used on the remote mounted transmission fluid filter housing while disconnecting and connecting
the transmission fluid cooler tubes or damage to the filter housing will occur.
NOTE: The quick connect fittings may need to be removed from the remote mount transmission fluid filter housing in order to disconnect the
middle fluid cooler tubes. Do not reuse the quick connect fittings.
Using the special tool, disconnect the fluid cooler tubes from the remote mount transmission fluid filter housing, and remove the middle fluid
cooler tubes from the vehicle.
