F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
Exploded Views
Removal and Installation
1. CAUTION: When removing upper body insulators, all other body mount support bolts must be loose before raising the vehicle cab to
prevent permanent structural damage from occurring to the vehicle cab.
Remove the middle lower body insulator.
2. Remove and discard the opposite side middle body insulator bolt.
3. Remove and discard the left and right front body insulator bolts.
4. Remove and discard the left and right rear body insulator bolts.
5. Raise the vehicle body enough to allow removal of the insulator.
