F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
6. Remove the 2 bolts and remove the front seat adjuster.
-
To install, tighten to 50 Nm (37 lb-ft).
7. CAUTION: Do not damage the plastic pivot bushing when removing the seat backrest.
Pull the front seat backrest away from the seat hinge and feed the lumbar cable and heating element wire through the seat cushion opening.
Separate the seat cushion from the seat backrest.
8. To install, reverse the removal procedure.
Front Seat Cushion - With Seat Integrated Restraints (SIR)
FRONT SEAT CUSHION - WITH SEAT INTEGRATED RESTRAINTS (SIR)
Removal
All seats
1. Remove the affected seat.
2. Remove the seat adjuster control knobs, covers and the seat side trim panel screws.
1
Remove the seat recliner lever cover screw and cover.
2
Pull to remove the lumbar control knob.
3
Remove the 3 seat side trim panel attachment screws.
