F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
Seat Latch: Service and Repair
Seat Latch - Supercab, Rear
SEAT LATCH - SUPERCAB, REAR
Removal and Installation
1. NOTE: 40 percent seat shown, 60 percent seat similar.
Remove the seat.
2. Remove the bolts.
1
Remove the upper bolt.
-
To install, tighten to 33 Nm (24 lb-ft).
2
Remove the lower bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Remove the bolt and remove latch shield.
-
To install, tighten to 50 Nm (37 lb-ft).
4. To install, reverse the removal procedure.
