F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
Brake Rotor/Disc: Service and Repair
Shield Removal and Installation, Front
Brake Disc Shield
Brake Disc Shield
Removal and Installation
4x4 vehicles
1. The wheel bearing and hub must be removed prior to removing the brake disc shield. Remove the wheel bearing and hub.
4x2 vehicles
2. Remove the brake disc.
3. Remove the brake disc shield screws and the brake disc shield.
^
To install, tighten to 11 Nm (8 ft. lbs.).
All vehicles
4. To install, reverse the removal procedure.