F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
5.4L engines
5. CAUTION: The large clutch assembly nut has a right-hand thread and must be rotated counterclockwise to remove it.
Using the special tool, remove the fan and fan clutch from the coolant pump pulley.
^
To install, tighten to 133 Nm (98 ft. lbs.).
6.8L engines
6. CAUTION: The large clutch assembly nut has a right-hand thread and must be rotated counterclockwise to remove it.
Using the special tool, remove the fan and fan clutch from the coolant pump pulley.
^
To install, tighten to 133 Nm (98 ft. lbs.).
All engines
7. Carefully position the fan and the fan clutch into the shroud.
8. Remove the 2 cooling fan shroud bolts, the shroud, fan and clutch.
^
To install, tighten to 6 Nm (53 inch lbs.).
9. To install, reverse the removal procedure.