F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
14. Disconnect the vacuum connectors and remove the vacuum reservoir.
15. Remove the nuts and position the sensor bracket aside.
All vehicles
16. Disconnect the A/C fittings.
1
Disconnect the auxiliary evaporator inlet line fitting (if equipped).
-
To install, tighten to 8 Nm (71 lb-in).
2
Disconnect the auxiliary evaporator outlet line fitting (if equipped).
-
To install, tighten to 8 Nm (71 lb-in).
3
Disconnect the condenser-to-evaporator line.
-
Discard the O-ring seals.
