F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
Alignment: Service and Repair
Toe Adjustment
Toe Adjustment - F-250 and F-350, 4x2
1. Using alignment equipment and the manufacturer's instructions, measure the toe settings.
^
Refer to Alignment Specifications in the Specifications portion for optimal alignment settings.
^
If the toe settings are not within specification, go to the next step.
2. Start the engine and center the steering wheel.
3. Turn the engine off and, using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position.
4. Loosen the tie-rod adjuster sleeve nuts.
5. Rotate the tie-rod adjusting sleeves to obtain the correct toe setting.
6. Position both adjusting sleeve clamp openings downward within 45 degrees of vertical. Tighten the nuts to 55 Nm (41 ft. lbs.).
7. Verify the toe settings and adjust as necessary.
