F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
4. Remove the 2 bolts and the safety belt buckle assembly.
-
To install, tighten to 40 Nm (30 lb-ft).
Right side safety belt buckle and center lap belt
5. Remove the 2 bolts and the safety belt buckle assembly.
-
To install, tighten to 40 Nm (30 lb-ft).
Both seats
6. NOTE:
-
When installing a new safety belt buckle and lap belt assembly, make sure to install it at the second row right hand position of the vehicle. This
is due to the safety belt buckles and tongues being different sizes from the left hand to the right hand side.
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure the safety belt buckle and lap belt are positioned between the seat backrest and cushion and accessible to the passengers after
installation.
To install, reverse the removal procedure.
7. Check the active restraint system for correct operation.
