F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
11. NOTE: Align the index marks made during disassembly.
Position the remaining spider, the centering flange yoke and the bearing cup.
12. Using the C-Frame and Screw Installer/Remover, press the bearing cup far enough into the yoke to place the opposite bearing cup on the spider
trunion.
13. Position the opposite bearing cup on the spider trunion.
14. Using the C-Frame and Screw Installer/Remover, press the bearing cup to just below the snap ring groove.
15. Install the snap ring.
16. Using the C-Frame and Screw Installer/Remover, press the opposite bearing cup to just below the snap ring groove.
