F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
Transmission Temperature Sensor/Switch: Service and Repair
Transmission Fluid Temperature (TFT) Sensor
Material
Removal
1. Remove the transmission fluid pan gasket and filter.
2. Disconnect the transmission fluid temperature (TFT) sensor electrical connector.
3. Press the tab, rotate the sensor counterclockwise and pull out.
4. Inspect the O-ring seal. If the O-ring seal is damaged, install a new O-ring seal.
Installation
1. Lubricate the O-ring seal with clean automatic transmission fluid and install a new TFT sensor. Make sure to slightly rotate the sensor to lock it in
place.
