F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
3. Raise transmission into position.
4. Position the crossmember to the transmission insulator and retainer, and loosely install the nut.
5. Install the LH crossmember bolts. Tighten to 81 Nm (60 lb-ft).
6. Install the RH crossmember bolts. Tighten to 81 Nm (60 lb-ft).
7. Install the bracket and loosely install the bolts.
8. Tighten the RH crossmember bolts. Tighten to 81 Nm (60 lb-ft).
9. Tighten the transmission insulator and retainer nuts. Tighten to 103 Nm (76 lb-ft).
10. Install the wire harness and install the two retaining clips to the rear of the crossmember.
