F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
Rear Door Window Motor: Service and Repair
Rear Door Window Regulator Motor
REAR DOOR WINDOW REGULATOR MOTOR
Removal and Installation
With power windows
1. Remove the window control switch.
With manual windows
2. Remove the window regulator handle.
1
Position the window regulator handle cover aside.
2
Remove the window regulator handle retaining screw and the window regulator handle.
All vehicles
3. Remove the rear door trim panel and the rear door trim watershield.
4. Remove the door speakers.
5. Tape the window glass in the full UP position.
6. Disconnect the window regulator electric drive.
7. Position the connector for the window regulator electric drive inside of the door.