F 250 2WD Super Duty V8-5.4L VIN 5 (2006)
Wiper Motor: Service and Repair
Windshield Wiper Motor
WINDSHIELD WIPER MOTOR
Removal and Installation
1. Remove the cowl top vent panels.
2. Remove the wiper mounting arm and pivot shaft assembly.
1
Remove the 5 bolts.
-
To install, tighten to 8 Nm (71 lb-in).
2
Disconnect the electrical connector.
3
Remove the wiper mounting arm and pivot shaft assembly.
3. Remove the bolt and the windshield wiper linkage.
4. Remove the bolts and the windshield wiper motor.
5. To install, reverse the removal procedure.