F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
1. NOTE: SIR seat has slide spacer on end of bolt.
Attach the armrest.
1
Position the armrest on the seat backrest. Install the armrest attachment bolt.
2
Restore the armrest fabric over the pivot end of the armrest.
2. Install the seat in the vehicle.
3. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
4. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).
5. Check the active restraints for correct operation.
