F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
1. Thoroughly clean and inspect the front wheel bearings and the disc brake hub and rotor.
-
Use brake parts cleaner to clean the front disc brake rotor.
2. Lubricate the wheel bearings.
-
Use long-life grease to lubricate the wheel bearings.
3. Install a new wheel hub grease seal.
1
Install the inner wheel bearing.
2
Install a new wheel hub grease seal.
4. Install the disc brake hub and rotor.
1
Position the disc brake hub and rotor.
2
Install the outer wheel bearing.
3
Install the wheel outer bearing retainer washer.
4
Install the spindle nut.
5. While rotating the disc brake hub and rotor, tighten the spindle nut.