F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Exhaust Pipe: Service and Repair
Early Build (Before September 29, 2003)
Turbocharger Inlet Y-Pipe - Early Build
NOTE: The names turbocharger inlet Y-pipe and turbocharger adapter pipe refer to the same component
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the turbocharger.
3. Remove the fuel injector control module (FICM).
4. Remove the retaining nuts and FICM bracket from the LH valve cover.
5. NOTE: There is a metal gasket between the exhaust inlet pipe and the exhaust gas recirculation (EGR) cooler.