F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Accelerator Pedal: Service and Repair
Adjustable Accelerator Pedal
ACCELERATOR PEDAL - ADJUSTABLE
REMOVAL
1. Position the accelerator pedal in the most rearward (toward the driver) position.
2. Disconnect the accelerator pedal adjuster cable.
3. Remove the bolts and the accelerator pedal aside.
4. Disconnect the electrical connector, and remove the accelerator pedal.
INSTALLATION
1. To install, reverse the removal procedure.
-
If a new accelerator pedal is being installed, make sure the brake pedal is in the most rearward (toward the driver) position before connecting
the accelerator pedal adjuster cable.
