F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Fuel/Water Separator: Service and Repair
Removal and Installation
FUEL CONDITIONING MODULE
Fuel Line Disconnect Tool
Special Tool(S)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. WARNING: Smoking or open flame of any type must not be present when working near fuel or fuel vapor.
Disconnect both battery ground cables.
3. Open the fuel/water separator drain valve to release the fuel pressure.
4. Disconnect the electrical connectors.
-
Disconnect the fuel pump electrical connector.
-
Disconnect the water-in-fuel electrical connector.