F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Fuel Line Coupler: Service and Repair
Push Connect Fuel Line Fittings
FUEL LINE FITTINGS - PUSH CONNECT
Disconnect Tool Set, Spring Lock Coupling
SPECIAL TOOL(S)
DISCONNECT
WARNING:
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly flammable
mixtures are always present and may be ignited, resulting in possible personal injury.
-
Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any of the fuel
lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury
or a fire hazard.
1. Relieve the fuel pressure.
2. Disconnect the safety clip from the male hose.
3. Install the fuel line disconnect tool and push into the fitting.