F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
2
Remove the PATS transmitter.
All vehicles
11. Remove the key-in-ignition warning indicator switch.
12. Remove the clockspring electrical connectors and wire harness from the side of the steering column.
1
Remove the clockspring electrical connectors from the bracket.
-
Disconnect the remaining electrical connector.
2
Remove the wire harness from the retainers.
13. Remove the clockspring.
1
Release the retaining clips.
2
Remove the clockspring.
INSTALLATION
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes at the beginning of the removal
procedure.
Vehicles receiving a new clockspring
1. NOTE: A new clockspring is supplied in a centralized position and held there with a key.
Remove the key from the clockspring, holding the rotor in its centralized position.
-
Do not allow the clockspring rotor to turn.
