F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
2. Install the safety belt retractor.
1
Align the tab into the seat backrest bracket.
2
Install the bolt.
3. NOTE: Prior to installation, make sure the safety belt webbing is not twisted.
Install the safety belt anchor and nut.
-
Make sure the anti-rotation tab is properly positioned into the seat frame.
4. Install the safety belt web guides.
1
Position the front safety belt web guide.
2
Position the upper safety belt web guide.
3
Install the pin-type retainers.