F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Starter Motor: Service and Repair
STARTER MOTOR
REMOVAL
WARNING: When performing maintenance on the starting system, be aware that heavy gauge leads are connected directly to the battery.
Make sure protective caps are in place when maintenance is complete.
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove starter solenoid protective cap.
4. Disconnect the starter motor electrical connections.
5. Remove the bolts and the starter.
INSTALLATION
1. To install, reverse the removal procedure.
